2002 Chevy S-10 Blazer Extreme

It Might as Well Have Been Body Dropped.

Miles Fork

1 Year, and 1 Year for Paint

Heavy the Past 5 Years

Severed Ties

Nissan Hardbody

This Started out as my First New Vehicle that I purchased Right out of College. I was Always in the Minitruck Scene, but had Never Built Anything too Extensive. I was Ready to Go a Little Deeper on Building a Minitruck with my New Blazer. I Slowly Gathered Parts and Got Got the Blazer Bagged on 20's. Once that Was Complete, I Rolled it for about a Year Just Bagged and on 20's but Took it to Some Shows and Realized I Wanted to Do More to it. So the Original Plan to go a Little Deeper Was to Lay it Out on 22's. In October of 2005 I Took the Blazer to Tony Neumann's House and We Tore it Down in his Backyard Garage. Once We got It Laid Out, Tony Pointed Out that We Were Doing alot of Work Already and It Really Wouldn't be Much More Work to Go Ahead and Body Drop It. All He Could Say was, "You Might as Well!" He Had a Good Point, If We Didn't do it then, We Probably Would have Wanted to Go Back and Do It Later. So We Kept Rolling With It. Everything Kept Snowballing into More and More and More...And We Ended Up Body Dropping it on 22's and 24's. Everything with the Build Went Pretty Smooth, No Major Complaints, Just Anxious to Get it Done. We Actually Were One of the First to Get a Set of Jason Thorbecke's Killer A-Arms! They Helped Out in a Major Way, As I was Having a Small Issue Getting Too Much Positive Camber with the A-Arms I Originally Had.

Tony Neumann for the Build Up, Without Him None of This Would Have Been Possible! Erin Neumann for Being Mom. Parker Neumann for Not Destroying Anything. Jason Thorbecke of SuicideDoors.com for All of his Help and Support! He has Been Extremely Giving, Kind, Supportive, and a Huge Part of this Truck! Thanks Jason! Ricky Doors, Matt "Don Shagwell" Baker, and Jacob for Their Support from SuicideDoors.com, Eric Bailey and Jerid Woods for Helping with the Stereo Install. David Adams at Kicker for Hooking Me Up with Kicker Goods! Brandon Burrell for His Support. My Parents Jim and Lynn for All of Their Support. Meagan Fletcher for her Support. ///RA Jeff for His Kindness and Support. Travis "Halfass" Hogan for Helping on Half of the Build Up. Shane "Super Whitey" Handcock at Supremem Customs in Edinburgh, Indiana. Mike and Vickie of Mike's Upholstery in Olney, Illinois. Daniel Kincaid for his Great Work and Availability. Jason Cassidy, Joe Fox, and Jeff Peyton at Discount Tire Co. DQ for his Friendship and For Not Touching Anything on the Truck. Jeff Bohannon for his Friendship and Support. Juice Jason for his Friendship and Support. John Joost for his Friendship and Support. Chuck "Nasty" Johnson for the 2 Sheet Metal Filler Pieces he Made. Dan Crawford for his Friendship and Support. Alex Steelsmith for the Friendship and Support. Paul Winkler for Fixing Some Paint Problems. Big Vic for His Hugs. Mark at Stylinsolutions.com. Zac at Grant Kustoms. Donnie, Big Mike, and Dustin at GaugeMagazine.com. Miles Fork for the Photos. Kaley Stoner for Modeling. Severed Ties for Welcoming Me.

1994 Chevy S-10

Chevy 2002

6

4.3

Gibson Stainless Headers, Full Dual Exhaust with Stainless Magnaflow Mufflers, K & N Air Filter with Custom Made Air Brushed Intake, MSD Coil Pack Blaster, Red Taylor 8 mm Plug Wires, March Billet Power Pulleys, High Torque Starter, Optima Yellow Top Battery Relocated to Rear Inside the Cab, Small Block Altered Water Pump, Two 10" Electric Fans, Shaved A/C Bracket, Lowered Motor and Custom Motor Mounts, Extended Fuse Box Wiring, Recessed Be Cool Radiator in Core Support, Bored Throttle Body, Hypertech Power Programmer

Billet Accessories, Painted Block (Silver) and External Components (Red), Chrome Master Cylinder and Painted Hydroboost, Chrome Radiator Hoses, 200 Amp Chrome Alternator

Stock

Stock

Stock

Stock

Stock

2

Tony Neumann and Robby Hohlt

2" Belltech Drop Spindles

Custom SD.com Triangulated 4-Link

Two Chrome Viair 420s

Airlift 3/8" Block Valves

Firestone F9000 Sleeve Bags

in Rear,

Slam Specialties RE-7

in Front

All Custom Cross Members, Custom Motor Mounts Lowering the Motor Down, 2 1/2" Traditional and 2" Stock Floor Body Drop, 2" Channel in Front Portion of Floor, Modified and Raised Transmission Hump and Drive Shaft Tunnel, SuicideDoors.com Control Arms, 3/8" Line, 4 Wheel Disc Slotted/Drilled Rotors, Stainless Steel Braided Brake Lines,

Two Chrome 3 Gallon Tanks

, Fuel Cell Rack with RCI 17 Gallon Aluminum Fuel Cell, SD.com Step Notch

Smoothed and Painted Front Frame Rails (Done by Painter)

Edge Engineering Focus

Edge Engineering Focus

22x9.5"

24x9.5"

245/30/22 Pirelli P Zero Nero

275/25/24

Light Metallic Silver and Victory Red

PPG

Black Breaker with Real Fire and Chrome Trim Airbrush

2" Channeled Front Floor, 2" Traditional Body Drop

Stock Hood Shaved and Cut to Fit Over the Stock Motor and 22's

Custom Billet Insert

Grant Kustoms

Street Scene Mirrors with Turn Signals, Billet Grilles, Billet Bow Tie, Black ebay Special Headlights and Corner Marker Lights

Shaved Fire Walls, Door Handles, Taillights, Tailgate, Gas Door, Antenna, Hood Squirts, and Third Brake Light. Tubbed Firewall, Fenders with Partial Trailer Fender Cut to a Point, and Rear End. Moved Booster and Wire Harness Mounts, Three Piece Grant Kustoms Step Shaver and Roll Pan, Grant Kustoms Modified 4 Runner Front Bumper with Custom Billet Insert, FBI Door Poppers

Tony Neumann and Robby Hohlt

Painted Red

Nu Image

Custom

Alpine Touch Screen DVD/CD In-Dash

Kicker 750/5

Kicker Components

Lokar

Cavalier Seats in Red and Silver Suede. Custom Rear Bench Seat from a Suzuki Sidekick