Jay Jancetic 2009 Nissan 370Z (Nismo Edition)

N/A

Jason Carroll

I wanted a track inspired (and was actively tracked for 3 seasons) 370 with a very clean look. Also, the intention was to have one of the highest documented WHP 370's in the country. (The top and bottom end of the engine has been built to be capable of being tuned to approx. 900 WHP. Car is currently road tuned at 650 WHP, but the intention this coming spring is to tune with race gas and push for 800-900 range. This was the long term goal when the engine was built).

3 years total.

7 years

Project X

As stated above, the intention this coming spring is to tune with race gas and push for 800-900 range. This was the long term goal when the engine was built. Car is also currently in the process of converting to wide body (Carbon Signal), wider wheels (Work Kai CR2P's), Varis carbon fiber hood, Carbon Signal carbon fiber lip kit, and Airlift Performance air bag system.

Purchased slightly used but as a stock Nismo edition in early 2011 with long term goals of documented high horse power, some tracking in mind and major modifications in mind.

Larry & Eli at Project X, Jason Carroll.

Previously, 2006 Scion TC (supercharged). Currently also own a custom built 1968 Shelby GT500 Mustang (900 HP Supercharged).

Nissan VQ37 2009

6

Bored .020 over, approx 3.8 liter

• GTM Turbo Kit Stage 2 • Cosworth Head Gaskets • ARP Head Studs • Arias Custom Pistons • GTM Titanium Connecting Rods • DW 1000cc Injectors • Bored To .020 Over • 650 WHP Pump Gas Tune by Project X • Zietronix boost pressure sensor • HKS EVC Electronic Valve Boost Controller • GTM Traction Control system • Fast Intentions 3” Exhaust • Stillen Oil Cooler • Nismo Finned Rear Differential Cover • CJ Motorsports Fuel System Upgrade & Dual Pump Surge Tank • Walbro Fuel Pump • Z1 Motorsports Urethane Motor Mounts

• Polished Engine (cam covers) • Seibon Carbon Fiber Engine Cover • Password JDM Carbon Fiber Radiator Shroud • UAM Motorsports Aluminum Overflow Tank • UAM Motorsports Aluminum Power Steering Tank • Dressup Bolts Blue Anodized Titanium Hardware • Color Match Painted Strut Bar • Color Match Painted Brake & Battery Covers • Custom Hood Dampers • Nismo Oil Cap • Mishimoto Black Silicone Hoses • Painted Throttle Bodies (black)

• Exedy Twin Disc Clutch & Flywheel

• Carbonetics 1.5 Way Carbon LSD

Stock

Stock

Project X Customs

Stock

Autopower 4 point roll bar (weld in and color match painted) *Only production model produced by Autopower for 370Z.

Project X Customs

Approx 2.5"

Stance GR+

Stance GR+

Stance GR+

Umbrella Auto Design Variable Ride Height system (not an airbag system, but not sure where else to list it. This is a "cup" system)

SPC Front & Rear Camber Arms, SPC Front A Arm, SPC Rear Toe Bolts, Stillen front and rear Adjustable Sway Bars

Color matched engine bay, polished cam covers

Work Gnosis GS2

Work Gnosis GS2

20x10.5 +10 offset

20x11 -1 offset

Nitto NT05 255/35ZR20

Nitto NT05 305/30ZR20

Pearl White

Stock

N/A

Doc's Body Shop

Stock

Stock Nismo

Ings +1 Dry Carbon (first in the US confirmed by Ings, possibly still the only one)

Doc's Body Shop

Zietronix ZT2 Dash DAQ dual harness (vehicle data monitoring system)

Nardi Type-A 330 MM Steering Wheel, Works Bell Splash Short Hub & Quick Release

Custom one-off center console gauge pod

Eclipse 7" DVD Head Unit with Nav/Blue Tooth

Precision Power PC Series Amplifiers

Precision Power 8" Art Collection Series Subs, Precision Power PC Series Components, • Precision Power Sedona Series Components

Project X Customs

Tommy Kaira Hebi-Bebi shift knob, B&M Precision Short Throw Shifter

Status Ring (FIA approved) Race Seats, Status 5 point racing harnesses

35

Custom one-off Carbon Fiber Sub Box, Custom one-off Lightweight MDF & Vinyl Covered Trunk Floor & Custom one off skateboard rack by Project X Customs

Stock